Pumps & Well Supplies

Pitcher Spout Pump

Designed for rugged, long life service. All parts are made from close grain, cast-iron for optimum strength. Base tapped for 1-1/4" pipe connection. All bolt lugs are reinforced for maximum strength. Cap can be adjusted for a wide range of handle positions. Nonfreezing when handle is left in Up position, and no foot valve is installed, the entire pump will drain. 20' maximum lift. 17-1/2" tall.

Simmons 3/4" Bronze Check Valve

Low lead check valve, bronze valve body and poppet assemble. Furnished with Buna-A O-ring, stainless steel spring, and locknut. Working pressure of 200 psi (pounds per square inch) female threads. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.

Simmons 1.25" Bronze Check Valve

Low lead check valve, bronze valve body and poppet assemble. Furnished with Buna-A O-ring, stainless steel spring, and locknut. Working pressure of 200 psi (pounds per square inch) female threads. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.

1-1/4"x24' Univ Hose Kit

1-1/4"X24' UNIV HOSE KIT

K2 1/4 Hp 2n1 Sub Utlty Pump

K2 1/4 HP 2-In-1 Submersible Utility & Transfer Pump
2-in-1 utility pump. This patented design can be operated in both submerged and non-submerged applications. If you need to drain an area like a flooded basement or pool cover, submerge the pump. If you need to drain a water heater or fish tank, use the transfer feature.

Submersible applications: drain hot tubs, stock tanks, flooded basements, water gardens, flat roofs and window wells.
Submersible performance: requires a minimum water depth of 1-1/2 In. to start pump, flow rate up to 1600 GPH at 0 Ft. of lift, removes water down to 1/2 In.
Transfer applications: drain water from boats, waterbeds, clogged sinks, water heaters, aquariums, washing machines, and utility sinks. Transfer performance: flow rate up to 950 GPH at 0 Ft. of lift, removes water down to 1/16 In. with the suction strainer.

3/4hp Cast Iron Shallow Jet Pump

3/4 HP CAST IRON SHALLOW WELL JET PUMP
The ES jet pump is specifically designed for shallow well applications with suction lifts up to 25'. 1-1/4" suction and 1" discharge. Ideal for homes, farms, cottages, and booster service. Each unit is capable of delivering enough pressure required for the efficient use of today's water-using appliances. Single-phase, 60 Hz, 3450 RPM, dual-voltage motor features Uni-Frame construction, copper windings, double-ball bearings, and overload protection with automatic restart.

2gal Expansion Tank

2gal Expansion Tank

3/4"zone Valve